Desa EFS26NRA, EFS26PRA, VMH26PRB ON/OFF Series Model Ghrcb, Thermostat Series Model Ghrctb

OPERATING FIREPLACE

Continued

Selector Switch in REMOTE Position (Optional Hand-Held Remote Control)

REMOTE		OL
	N
OFF
	O	FF O
ON	O
	T
	LIP	HI

Control Knob	Flame
	Adjustment Knob

Figure 39 - Setting the Selector Switch, Control Knob, and Flame Adjustment Knob for Hand-Held Remote Operation

ON/OFF SERIES (MODEL GHRCB)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 40).

TO LOCK press both buttons on hand-held re- mote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

TO UNLOCK press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control

Button Turns

Burners On

and Off

Figure 40 - On/Off Hand-Held Remote

Control Unit (GHRCB)

THERMOSTAT SERIES (MODEL GHRCTB)

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 41). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1.Press the POWER and LOCK buttons to- gether to turn on the hand-held remote control.

2.Press the MANU button to turn on the fireplace.

3.Press the POWER and LOCK buttons to- gether to turn off the fireplace.

Auto (Thermostatic) Mode

1. Press the POWER and LOCK buttons to- gether to turn on the hand-held remote con- trol.

2.Press AUTO button to select this mode.

3.Set the desired room temperature by press- ing the TEMP + or - buttons.

4.Press the POWER and LOCK buttons to- gether to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fire- place. Ideally, place the hand-held remote in the center of the room facing towards the fireplace. Note: Do not hold the hand-held remote for a long time. Body temperature will affect its op- eration in the AUTO mode.

Digital Display	Turns Hand-
Shows
	Held Remote
Temperature
	On or Off and
and Settings
	Allows You to
Turns Burners	Choose the
	Manual Setting
On or Off
Decreases	Selects Auto
	Setting
Room
Temperature	Increases
in AUTO Mode
	Room
Locks System to Prevent	Temperature in
	AUTO Mode
Accidental Ignition

Figure 41 - Thermostat Hand-Held Remote Control Unit (GHRCTB)

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1.If the average room temperature exceeds 82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fire- place off. This feature is not available in the MANU mode.

2.The receiver continuously receives signals from the hand-held remote to control the room temperature. If the hand-held remote is misplaced, obstructed, or for any reason cannot transmit to the receiver, the receiver will shut off the fireplace after 8 minutes.

24 www.desatech.com 113110-01A