Gas leak. See Warning statement at

TROUBLESHOOTING

Continued

WARNING: If you smell gas

•Shut off gas supply.

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the ﬁre department.

IMPORTANT: Operating ﬁreplace where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors.

OBSERVED PROBLEM	POSSIBLE CAUSE		REMEDY

Fireplace produces unwanted odors	1.	Fireplace burning vapors from paint, hair	1.	Ventilate room. Stop using odor causing
		spray, glues, etc. (See IMPORTANT		products while ﬁreplace is running
		statement above)
	2.	For propane/LP gas, low fuel supply	2.	Contact local propane/LP supplier
	3.	Gas leak. See Warning statement at	3.	Locate and correct all leaks (see Gas
		top of page		Line Hook-Up, page 11)
Gas odor even when control knob is in OFF	1.	Gas leak. See Warning statement at	1.	Locate and correct all leaks (see Gas
position		top of page		Line Hook-Up, page 11)
	2.	Control valve defective	2.	Replace control valve

Gas odor during combustion	1.	Foreign matter between control valve	1.	Take apart gas tubing and remove for-
		and burner		eign matter
	2.	Gas leak. See Warning statement at	2.	Locate and correct all leaks (see Gas
		top of page		Line Hook-Up, page 11)

Dark residue on logs or inside of ﬁreplace	1.	Improper log placement	1.	Properly locate logs
	2.	Air holes at burner inlet blocked	2.	Clean out air holes at burner inlets. Pe-
				riodically repeat as needed
	3.	Burner ﬂame holes blocked	3.	Remove blockage or replace burner
	4.	Improper venting or excessive	4.	Have the vent system inspected, includ-
		blockage		ing the termination cap. Remove any
				restrictions or obstruction
	5.	Excessive amounts of embers and pan	5.	Clear excess embers until a minimum
		material		gap of 1/2" remains under the grate

For more information, visit www.desatech.com

108795-01M

VM36P, H) AND VM42(B, M42P, H) AND VM42P(B, M36P specifications

Desa H), M36P, H) and VM42P(B, M42P, H) and VM42(B are notable entities in the realm of technological solutions, particularly in the fields of engineering and manufacturing. These designations often pertain to advanced machine models or systems that incorporate various characteristics tailored for specific industrial applications.

The Desa H) series is recognized for its robust performance in industrial settings. It typically features enhanced efficiency and durability, making it suitable for rigorous operational environments. The key technologies integrated into the Desa H) models include high-performance motors and precision control systems that ensure optimal functionality. In particular, these systems are designed to minimize energy consumption while maximizing output across diverse applications.

Meanwhile, the M36P and its variants, including the M36P,H), are engineered with versatility in mind. They are equipped with modular components that allow for easy customization based on user requirements. This adaptability is a significant advantage, as it enables operators to modify the system to suit various tasks without extensive reconfiguration. Noteworthy features of the M36P series include advanced user interfaces that facilitate ease of operation and monitoring.

The VM42P(B, M42P, H) series takes innovation a step further by integrating state-of-the-art automation technologies. With features like smart sensors and AI-driven analytics, the VM42 models provide unprecedented levels of precision and reliability. These technologies enable predictive maintenance, allowing users to anticipate potential issues before they arise, thus reducing downtime and operational costs. The VM42(B) variant is particularly appreciated for its high throughput capabilities, making it ideal for mass production settings.

All models share common characteristics such as rugged construction, user-friendly interfaces, and compliance with international safety standards. Additionally, they are designed for scalability, which ensures that businesses can expand their operations with ease as demand grows. Enhanced connectivity options and IoT integration further allow for real-time data analysis and remote monitoring, fostering smarter production environments.

In summary, the Desa H), M36P, H) and VM42P(B, M42P, H) and VM42(B series represent a fusion of innovative engineering and practical application. Each model’s distinct features cater to a broad range of industrial needs, making them indispensable tools in modern manufacturing and engineering landscapes. Through their commitment to efficiency, adaptability, and intelligent technology, these systems pave the way for enhanced productivity and sustainability in various sectors.

Desa H) AND VM42P(B, H) AND VM42(B, VM36P Gas leak. See Warning statement at

Models: VM36P H) AND VM42(B M42P H) AND VM42P(B M36P H)

TROUBLESHOOTING

OBSERVED PROBLEM

VM36P, H) AND VM42(B, M42P, H) AND VM42P(B, M36P specifications