INSTALLATION
Continued
5.Place the upper end of log 5 into notch on the left of log 2 (see Figure 27). Rest the lower end of log 5 on the grate as shown in Figure 28.
6.Insert the lower end of log 6 between the first two grate fingers as shown in Figure 28 and position the upper end of log 6 into the notched area on the front of log 2 as shown in Figure 28.
As an option to enhance the look of the hearth, you may place the | |
lava rock provided around the front and sides of the burner. | |
NOTICE: Do not put lava rock inside the burner pan or | |
around the air mixer fitting. Placing lava rock inside the | |
burner pan or blocking the openings of the propane/LP | |
| |
| Log 5 |
Log 6 | Notch |
| Log 4 |
Notch |
|
13
LOG PLACEMENT FOR M42, M42P, VM42 AND VM42P MODELS
1.Place large back log (log 1) onto grate making sure notches rest over grate (see Figure 29).
2.Insert lower end of log 2A between the first two grate fingers and position the upper end into the notch on the front of log 1. See Figure 29. Place log 2B on the front right side of grate as shown in Figure 29.
3.Place log 3 into notch on top left of log 1, resting the lower end on the left two grate fingers (see Figure 30).
4.Place the upper end of log 4 into the notch on log 1 as shown in Figure 30. Rest the lower end of log 4 on the middle grate finger as shown in Figure 31.
Notch
Log 1
Log 2A
Log 2B
Figure 27 - Installing Logs 5 and 6
Figure 28 - Logs Installed for M36, M36P, VM36 and VM36P Models
Figure 29 - Installing Logs 1, 2A and 2B
Log 3
Log 4
Notches | Log 1 |
Figure 30 - Installing Logs 3 and 4
For more information, visit www.desatech.com