Product
Identification
Model CRB and
HRB Series Logs
Ignitor |
|
Control Knob | Base |
| Assembly |
Model VUL | Rear Burner |
| |
Series Logs |
|
State of Massachusetts: The installa- tion must be made by a licensed plumber or gas fitter in the Commonwealth of Massachusetts.
Sellers of unvented propane or natural
Optional Remote
Control Accessories
There are four optional remote controls that | |||
can be purchased separately for | |||
Models Only: |
|
| |
• | wall switch | • | |
• | wall thermostat | • |
See Accessories, page 42.
The wall thermostat or
Ignitor |
|
| |
Control |
|
| |
Remote Knob | Flame | Base | |
Control | Adjustment | ||
Assembly | |||
(Optional) | Knob |
|
Figure 1 - Product Identification
Local Codes
Install and use heater with care. Follow all local codes. In the absence of local codes, use the lat- est edition of The National Fuel Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Product Features
Operation
This heater is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by both realistic flames and glowing coals. This heater is designed for vent- free operation with flue damper closed. It has been tested and approved to ANSI Z21.11.2 standard for unvented heaters. State and local codes in some areas prohibit the use of
Safety Device
This heater has a pilot with an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for
Electronic Ignition System
This heater has an electronic ignitor to light heater fuel supply.