Desa TD121 Assembly, Continued, Attaching Tank Straps to Base, Tank Restraint Straps, Tank Cover

Assembly

Continued

5.Install tank straps to base as (see Figure 5).

6.Install tank restraint to tank and fasten restraint straps around legs as shown in

Figure 6.

7.Install the tank cover (see Figure 7).

8.Assemble reflector with small wing nuts and bolts as shown in Figure 8.

9.Install reflector over post on top of burner assembly. Install reflector cap over post. Attach reflector and reflector cap using large wing nuts (see Figure 9).

Min. 2" from

Tank to Ground

Figure 5 - Attaching Tank Straps to Base

Figure 6 - Tank Restraint Straps

Figure 7 - Tank Cover

Wing Nuts

and Bolts

Figure 8 - Reflector Assembly

Bolts on

Top of

Burner

Assembly

Reflector

Cap

Wing

Nut

Figure 9 - Attaching Reflector and Reflector Cap to Burner Assembly

www.desatech.com120948-01A