Operating Guidelines And Maintenance Instructions

BURNER FLAME ADJUSTMENT

Burner Removal

OPERATING GUIDELINES AND MAINTENANCE INSTRUCTIONS CLEANING AND MAINTENANCE

Glass Door Panels

BURNER FLAME ADJUSTMENT

Continued

BURNER REMOVAL

CAUTION: Before proceeding, make sure the entire unit is cool.

1.Remove the top and bottom louvers and screen. Open the glass door (left or right side).

2.Carefully remove the log set.

3.Remove the screw that attaches the burner to the bracket.

4.Slide the burner towards the front of the unit, lift, and remove from the firebox.

5.To reinstall the burner, slide the burner towards the rear of the unit and secure burner to bracket with screw.

CAUTION: Make certain the orifice is inside the venturi tube's air shutter, see Figure 48, page 20.

WARNING: Children and adults should be alerted to the hazards of high surface temperatures, and to stay away from the appliance to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the appliance.

WARNING: Have a qualified agency periodically inspect the vent system at the start of each heating season, for any obstruction which may hinder its normal operation. Never obstruct the flow of com- bustion and ventilation air. Keep the front of the appliance clear of all obstacles and materials.

CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.

6. Replace the log set, close door with latches, and attach screen	For further operating guidelines, contact your authorized dealer.
and louvers.

OPERATING GUIDELINES AND MAINTENANCE INSTRUCTIONS

When lit for the first time, the appliance may emit a slight odor for about 16 - 24 hours. This is normal and is due to the “curing” of the logs and the “burn-in” of internal paints and lubricants used in the manufacturing process. Keep compartments, logs, burners, and area surrounding the logs clean by vacuuming or brushing at least twice a year. Temporary removal of the log set may ease the cleaning of the burner and pilot assembly. In cleaning, take care not to alter the pilot or burner location. Be sure appliance is cool before each maintenance session.

CAUTION: The appliance and logs can get very hot - Handle only when cool.

WARNING: Turn off gas and wall switch before servicing appliance. Any safety screen or guard re- moved for servicing the appliance must be replaced prior to operating the appliance.

WARNING: Make certain wires and gas lines are not touching the underside of the firebox.

CLEANING AND

MAINTENANCE

WARNING: Turn off fireplace and let cool before cleaning.

CAUTION: You must keep control areas, burners, and circulating air passageways of fireplace clean. Inspect these areas of fireplace before each use. Have fireplace inspected yearly by a qualified service person. Fireplace may need more frequent cleaning due to excessive lint from carpeting, bedding mate- rial, pet hair, etc.

GLASS DOOR PANELS

WARNING: Handle glass door panels with care. Do not strike, slam or otherwise abuse glass doors. Do not operate appliance with panel(s) and glass removed, cracked, or broken. Replacement of the panel(s) should be done by a licensed, qualified service person.

Any household glass cleaner may be used to clean the glass panel. Do not use abrasive cleaners as this may damage the glass. Clean glass only when cool.

For morevisit www..com