4.Unscrew and remove the fuel valve bowl.
Fuel Valve
Fuel
Valve
Bowl
5.Clean and replace fuel valve bowl. Tighten securely.
6.Replace and secure panel.
Fuel Filter
NOTE: It is recommended to run all the gasoline from the tank before changing or cleaning the fuel filter.
1.Stop engine as described in the Operation section.
2.Place the fuel valve lever in the OFF position.
3.Remove the recoil end panel as described in the Fuel Valve Bowl paragraph.
4.The fuel line can be removed from the fuel filter cover by squeezing the fuel clamp and sliding it up the fuel line.
Cap
Fuel Clamp
Fuel Line
Fuel Filter
Cover
5.After removing the fuel line unscrew the cap on the fuel filter cover. NOTE: Do not loose rubber washer from fuel filter cover cap.
6.The fuel filter can now be removed to clean or replace.
7.Place new or cleaned filter into cover.
8.Press rubber washer into fuel filter cap and screw cap into fuel filter cover body.
9.Reconnect fuel line.
10.Replace and secure panel.
Fuel Tank Filter
Cleaning
1.Stop engine as described in the Operation section.
2.Remove gas cap and remove the fuel tank filter.
3.Clean with solvent. Wipe off excess solvent and replace fuel tank filter into tank.
4.Replace gas cap.
Muffler Screen
Cleaning
1.Stop engine as described in the Operation section.
2.On the exhaust end of the unit, remove the four screws securing the sides of the panel and the two fasteners with isolators securing the bottom of the panel. Carefully pull panel away from the unit noting the insulation is attached to the panel.
A04669 | 16- ENG |
