Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software
This will enable the software iSCSI initiator. To verify that it is enabled type the following command:
This can also be accomplished by using the vCenter GUI.
From the vCenter GUI on the ESX host navigate to Configuration
Under the General tab click the Configure button. Place a check mark in Enabled and hit Ok. This will enable the iSCSI initiator and assign a unique iqn to the ESX host. Administrators familiar with enabling iSCSI in ESX 3.5 will notice that the firewall policies are automatically set when you enable it in vSphere4.
Page 22
