
Single port KVM over IP switch
“confirm ” requests confirmation by a dialog box before the key strokes will be sent to the remote host.
“keycode ” is the key to be sent. Multiple key codes can be concatenated with a plus, or a minus sign. The plus sign builds key combinations, all keys will be pressed until a minus sign or the end of the combination is encountered. In this case all pressed keys will be released in reversed sequence. So the minus sign builds single, separate keypresses and
6.4.2Power Control
Figure 6-16. Power Control
The Power Control panel enables the access to the most important external buttons of your host system besides from the keyboard. These buttons are the reset and the power button.
To enable power control by ATX/Reset wires, set this option. Furthermore, the duration the according button is pressed can be adjusted. Set the duration for
•ATX Reset button press
•ATX Power button short press
•ATX Power button long press
Then, click “ Apply ” to submit your changes.