Place the unit in an area that will meet minimum the clearance requirements: Front, Back & Sides = 2 feet.

This unit is heavy. Use caution when moving. Tilt the unit forward until the integrated transport rollers on the front stabilizer make contact with the ground and slowly push or pull into the desired position. Always unplug the unit from the outlet before moving or servicing.

Keep the unit away from walls to allow proper ventilation. Air should be able to circulate freely around the unit. Keep all air openings free of dirt and dust.

Never insert anything into the openings.

The Response Er6c is intended for indoor use in a home environment. Store indoors in a dry space.

Place your unit on a solid, level surface when in use. Never operate if the unit is unstable. Review the assembly and installation instructions for information regarding the leveling of the unit.

Make sure all knobs for adjustments are fastened securely before getting on the unit and after making any adjustments (i.e. seat post, saddle, seat assembly and handlebars).

Use the handlebars when getting on and off the Response Er6c unit.

Never operate the unit if it is damaged or broken. Contact your local authorized Diamondback Fitness Dealer for service.

Please unplug the unit after exercising.

Do not remove the covers or other components. Only Diamondback Fitness Dealers or Authorized Technicians should perform service on the unit.

Assembly

Assembly of the Response Er6c should be performed by a Diamondback Fitness Dealer or an Authorized Technician as a significant amount of technical knowledge is required for safe and complete assembly of the unit. Many retailers will offer delivery and assembly as part of the sales agreement. If this unit was sold unassembled (in the carton) and you do not feel you can perform the assembly, please call the dealer for service. Service calls for improper assembly are not covered by the Warranty Policy and any associated charges will be the responsibility of the owner.

NOTE: Save this manual for your reference.

11

Page 11
Image 11
Diamondback PM4360 manual Assembly