2.4.2 POWER SUPPLY OUTPUTS

The Vega Wireless Camera’s clamp strip is provided with 2 power supply outputs to power any possible presence detection sensor.

To power the sensor you only need to connect the Vega Wireless Camera’s pin 1 to the positive contact (+) of the presence detector and the Vega Wireless Camera’s pin 3 to the negative contact (–) of the presence detector. To connect and power a second presence detector you must connect the Vega Wireless Camera’s pin 4 to the positive contact (+) of the presence detector and the Vega Wireless Camera’s pin 6 to the negative contact (–) of the presence detector.

When using the backup battery, the power supply outputs are subject to a deterioration of around 3 Volts.

2.4.3CONNECTION OF A PRESENCE DETECTOR TO THE VEGA WIRELESS CAMERA

Together with the above-mentioned information, herewith you will find a diagram and a table with the description of the pins to use for a direct connection of a presence detector to the Vega Wireless Camera.

PRESENCE DETECTOR

VEGA WIRELESS CAMERA

PRESENCE DETECTOR

VEGA WIRELESS CAMERA

PIN +

PIN 1

PIN –

PIN 3

PIN N

PIN 2

PIN C

PIN 3

18