Live

The phone call is associated to an Internet connection request.

 

When you need to access the Vega Wireless Camera GPRS remotely, you

 

only need to call the Vega Wireless Camera GPRS phone number from your

 

mobile phone. The camera reads the incoming phone number and compares

 

it to the phone numbers in the Cli Enabled configuration page. If the user is

 

enabled, then Vega Wireless Camera denies the call and immediately

 

activates an Internet connection via GPRS. Then it notifies the user

 

requesting it with its IP address, via a SMS message.

Alarm On Off

The phone call is associated to the camera Standby management.

 

The Standby function allows – with the camera on - to enable or disable the

 

digital inputs and to perform the alarm detection.

 

For example, you may disable the camera before entering home and

 

reactivate it when leaving it.

 

When the Vega Wireless Camera GPRS is active, you only need to call the

 

Vega Wireless Camera GPRS phone number from your mobile phone. The

 

camera reads the incoming phone number and compares it to the phone

 

numbers in the Cli Enabled configuration page. If the user is enabled, then

 

Vega Wireless Camera denies the call. From now on the camera will ignore

 

the status changes on the digital inputs and you may, for example, enter

 

home without receiving an alarm message by the camera.

 

When you go out again, to reactivate your camera you just need to behave in

 

the same way: you will have to call the camera that is going to detect the

 

phone number and deny the call again. This time, to make sure about

 

activation, you will receive a phone call by the camera after a few seconds:

 

deny the phone call by pressing the call end button on your mobile phone

 

(usually the red hang-up button).

 

To sum up:

 

- to disable the digital inputs, call the Vega Wireless Camera GPRS; this will

 

deny the call without calling back.

 

- to enable the digital inputs, call the Vega Wireless Camera GPRS; this will

 

deny the call and after a few seconds it will call you back to confirm the

 

operation.

Cli Enabled: in these fields you must digit the phone numbers of the users who will be allowed to manage the phone call. The phone number should be preceded by the international prefix (e.g. +393351234567).

SMS To CLI: SMS management to confirm the operation.

Disabled

The SMS message with the IP address following a Live Internet connection

 

request is sent to all phone numbers in the GPRS configuration page.

Enabled

The SMS message with the IP address following a Live Internet connection

 

request is sent to the user who requested the connection and called the Vega

 

Wireless Camera GPRS.

WARNING: before calling the phone number of the SIM card in the Vega Wireless Camera GPRS, check that your mobile phone is enabled to transmit your phone number. If the camera receives an anonymous call (that is no phone number is displayed), it does not perform any operation and only denies the call. Check with your phone company that the SIM card in the Vega Wireless Camera GPRS is enabled to receive voice phone calls. The SIM cards with a Machine To Machine contract are not allowed to receive voice phone calls.

38