Operation - TV
Basic Operation
Power On/Off
Press the “POWER” key to turn ON the Display. The power indicator changes from red to green. When the power is OFF (standby), the power indicator changes from green to red.
Source select
Press “SOURCE” to select the input signal. Each time the source button is pressed, the
TV 
VGA 
DVI 
AV1 
AV2
Component2 (Y2Pb2Pr2) | Component1 (Y1Cb1Cr1) | AV3 |
TV Button
Switch source to TV mode directly without using the source key to select.
Adjusting the volume
Press f on the remote controller to increase the volume.
Press e to decrease the volume.
Channel select
Press c on the remote controller to change to the next viewable channel.
Press d to change to the previous channel or you can select a channel number directly and press “
” to confirm.
Menu On/Off
Press “MENU” key to display the OSD main menu On/Off. Use e/f to select the item on the main menu.
Press “ENTER” to the submenu and pressd/c navigate up/down. Use e/fto adjust the setting.
Press “MENU” key to escape selection or revert to other selections.
9
