APPENDIX #2 – SENDING E-MAIL

1) Connect the Sub-D plug on the Video Web Server with the COM/NO ports of the Sensor.

Video Web Server

Pin 5

GND

N.O. Sensor

ALARM INPUT

Pin 4,7, 8 or 9

A normally open contact/sensor can be connected where

Pin 5 is Ground and Pin 4, 7, 8 and 9 is the Alarm Input

2) Set the “Mail setting ” item in the system configure.

digimerge.eng

digimerge.eng

dliu@digimerge. c o m

NOTE 1

: You can get all the data from the ISP ( Internet Service Provider) company or by

 

mailing to the server supplier (POP3/SMTP server).

NOTE 2

: You should set the mail list when the alarm is triggered.

NOTE 3

: When the alarm is triggered, you can find “

” message showed on the screen.

 

The AP will start recording automatically and you can get the email with the

 

snapshot image in your mailbox.

 

-36-

Page 39
Image 39
Digimerge D4202 user manual Video Web Server, Appendix #2 Sending E-MAIL