ADVANCED SETTINGS
Click on “System Config” for advanced setting.
SYSTEM CONFIG
NETWORK 
NOTE :
After all setting changes, press “apply” to refresh the data in the Video Web Server.
Reboot--
Press this button to restart the Video Web Server.
To set up the network setting of the Video Web Server, check with your network administrator or Internet Service Provider.
1.You can get all the information, Server IP, Gateway, Net Mask & DNS, from your ISP company.
2.Web Port : You can control the Video Web server via this port.
3.Mac : The equipment’s physical address.
4.IP Type : This unit only supports Static IP address, if you want to use Dynamic IP, please obtain through a Router.
MAIL 
When the alarm is triggered, the Video Web Server will capture the instant picture and
1.You can get all the data from the ISP company or by mailing to the server supplier.(POP3/SMTP server)
2.You should set the mail list which you want to send to when the alarm is triggered.
3.If it is not necessary for you to verify password and user’s name, please choose Verify as “No”.
4.Please refer to appendix#2 for more details.
