2000 Owner’s Manual
30
PUMP RUN TIME
After setting the number of filter cycles, the top line of the LCD will read “SET PUMP RUN TIME”. Push the UP or DOWN pads to toggle between 30, 45 and 60 minutes. This sets the length of time the pump will run when a jets pad is pushed. For example, if you choose 45 minutes, when you push a jets pad, the pump will run for 45 minutes before shut- ting down automatically. When your desired pump run time appears on the LCD push the PROGRAM pad to select it. The
TEMPERATURE UNITS
After setting the pump run time, the top line of the LCD will read “SET TEMPERATURE UNITS”. Push the UP or DOWN pads to toggle from ˚F to ˚C. When your desired temperature unit appears in the LCD, push the PROGRAM pad to select it. The
VISION CARTRIDGE
After setting the temperature units, the top line of the LCD will read “SET VISION CARTRIDGE”. Push the UP or DOWN pads to toggle between “Yes” and “No”. If you are currently using a Vision Cartridge select yes, if not, select no. Selecting “yes” will prompt the control to notify you when your cartridge needs replacement. When your desired selection appears in the LCD, push the PROGRAM pad to select it. The
LCD INVERT
The invert feature will flip the text on the LCD so it can be easily read from both inside and outside the spa. To invert the text, simply push the “ENTER” pad three times. To return the text to its original position, repeat this process - push the “ENTER” pad three times.
CONTROL PANEL LOCK
To help prevent unauthorized use of the spa, the control panel may be locked. When the control panel lock is engaged, all programmed or default spa functions will operate normally but all control pads will not operate. When the panel is locked, the LCD will display message “ALL
SPA FUNCTIONS LOCKED”.
