2000 Owner’s Manual
32
CONTROL PANEL RESET
This function is used to completely reset the clock and all other system variables to the factory defaults. Please keep in mind that this resets all maintenance messages (clean filters, change water, etc.) as if the spa is being installed the day of the panel reset.
To reset the control system all of the following pads must be pushed within 3 seconds:
1)Push the ICON (logo) pad
2)Push the ENTER pad
3)Push the PROGRAM pad
The top line of the LCD will read “RESET PROGRAMMING?” The bottom line of the LCD will read “IF SO, PUSH ICON”
4)Push the ICON pad to reset the entire control system to factory defaults or do not touch a pad for 10 seconds to exit.
SCROLLING MESSAGE CENTER MESSAGES
Because of the advanced programming features of your scrolling display, your spa will prompt you when you need to perform routine mainte- nance. For example:
RINSE FILTERS
Every other month, the top line of your LCD display will read, “RINSE FILTERS” and the message “REMOVE FILTERS & RINSE WITH HOSE... PUSH AND HOLD ICON PAD MORE THAN 3 SECONDS TO RESET THIS MESSAGE” will scroll from right to left on the bot- tom line of the display. To reset this message, push and hold the Dimension One Spas ICON (logo) pad located at the right hand side of the control for 3 seconds.
CLEAN FILTERS
Every alternating month, the top line of your LCD display will read, “DIRTY FILTER” and the message “REMOVE FILTERS & CLEAN IN SOLUTION... PUSH AND HOLD ICON PAD MORE THAN 3 SEC- ONDS TO RESET THIS MESSAGE” will scroll from right to left on the bottom line of the display. To reset this message, push and hold the Dimension One Spas ICON (logo) pad located at the right hand side of the control for 3 seconds.