1.3
1Please Read Immediately
1.1Important Information:
ATTENTION!
The device is not suitable for operation with a frequency converter.
ATTENTION!
When transporting the heat pump, ensure that it is not tilted more than 45° (in any direction).
ATTENTION!
The heat pump and the wooden pallet are only joined by the packing film.
ATTENTION!
Do not restrict or block the area around the air intake or outlet.
1.2Legal Regulations and
Directives
The construction and design of the heat pump complies with all relevant EU directives, DIN/VDE regulations (see CE declaration of conformity).
When connecting the heat pump to the power supply, the rele- vant VDE, EN and IEC standards are to be fulfilled. Any further connection requirements stipulated by local utility companies must also be observed.
When connecting the heating and/or cooling system, all applica- ble regulations must also be adhered to.
Persons, especially children, who are not capable of operating the device safely due to their physical, sensory or mental abilities or their inexperience or lack of knowledge, must not operate this device without supervision or instruction by the person in charge.
Children must be supervised to ensure that they do not play with the device.
English
ATTENTION!
In the case of
ATTENTION!
Never use cleaning agents containing sand, soda, acid or chloride as these can damage the surfaces.
ATTENTION!
We recommend the installation of a suitable corrosion protection system to prevent the formation of deposits (e.g. rust) in the condenser of the heat pump.
ATTENTION!
Before opening the device, ensure that all circuits are isolated from the power supply.
ATTENTION!
Work on the heat pump may only be carried out by authorised and qualified
1.3Energy-Efficient Use of the
Heat Pump
With the purchase of this heat pump you are helping to protect the environment. A prerequisite for
It is particularly important for the efficiency of a heat pump to keep the temperature difference between heating water and heat source as small as possible. For this reason, it is advisable to de- sign the heat source and heating system very carefully. A tem- perature difference of approx. one Kelvin (1 °C) increases the power consumption by around 2.5 %. When designing the heating system, it should be borne in mind that special consum- ers such as e.g. hot water preparation should also be considered and dimensioned for low temperatures. Underfloor heating systems (panel heating) are optimally suited for heat pump use on account of the low flow temperatures (30 °C to 40 °C).
It is important to ensure that the heat exchangers are not con- taminated during operation because this increases the tempera- ture difference, in turn reducing the COP.
Correct adjustment of the heat pump controller is also important for
The heat pump is equipped with an overflow mechanism to pre- vent very low flow rates in the heat pump.
The installed buffer tank increases the amount of water in the heating circuit and guarantees reliable defrosting.
www.dimplex.de |
