Directed Audio XTR5002, XTR2502 owner manual Specifications

Specifications

Amplifier Section	XTR2502	XTR5002
Power Output 4Ω (Watts) *	70 x 2	150 x 2
Power Output 2Ω (Watts)	140 x 2	300 x 2
**
Power Output 4Ω (Watts)	250 x 1	500 x 1
Bridged
Amplifier Efficiency	> 60% into 2Ω load	> 60% into 2Ω load
	at max.. power	at max.. power
Signal to Noise ratio at	>95dB	>95dB
rated output power and
lowest impedance
Externally Bridgeable	No	No
Distortion at Rated Power	0..05% THD+N	0..05% THD+N
Frequency Response	20 Hz to 20 kHz +/-	20 Hz to 20 kHz +/-
	2..5dB	2..5dB
Linear Bandwidth	20 Hz to 30 kHz	20 Hz to 30 kHz
	+/- 3dB	+/- 3dB
Damping Factor	>100	>100
Input Sensitivity	200mV to 8V	200mV to 8V
Input Sensitivity Selection	Yes	Yes
Switch
Supply Voltage Range	9 to 16V	9 to 16V
Protection	Thermal, DC offset, short protection,
	under-voltage

Amplifier Section	XTR2502	XTR5002
Terminal Wire Gauge	Power 4 AWG	Power 4 AWG
	Remote 12 AWG	Remote 12 AWG
	Ground 4 AWG	Ground 4 AWG
	Speaker 12 AWG	Speaker 12 AWG
Input Impedance	20 kΩ	20 kΩ
Balanced Line Inputs	Yes	Yes
Dimensions (inches)	8..75”x 9..3”x 2..5”	11..5”x 9..3”x 2..5”
Crossover Section
High Pass Crossover	Continuously vari-	Continuously vari-
	able (50-2 kHz)	able (50-2 kHz)
Low Pass Crossover	Continuously vari-	Continuously vari-
	able (50-2 kHz)	able (50-2 kHz)
Infrasonic (subsonic) Filter	Selectable On/Off	Selectable On/Off
	12dB/Octave	12 dB/Octave
	12dB at 24 Hz	12dB at 24 Hz
Bass Boost	N/A	0 - 18dB

*Continuous 4Ω load 20Hz to 20kHz, < 1% THD, with input voltage at 14..4 VDC..

**Continuous 2Ω load 20Hz to 20kHz, < 1% THD, with input voltage at 14..4 VDC..

© 2008 Directed Electronics. All rights reserved. 5