FIRST THINGS FIRST
CONNECTION B
VERY GOOD PICTURE AND SOUND QUALITY
To use this connection you must have:
•TV with separate RF and audio/video inputs (jacks)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box:
1.Connect coaxial cables as shown.
2.Connect audio/video cables as shown.
TV |
|
IN |
|
VIDEO | R AUDIO L |
CABLE | SATELLITE |
DISH | |
OR |
|
|
DSS | IN FROM ANT |
|
|
RECEIVER | VIDEO | R | AUDIO |
| L | ||
| OUT TO TV |
| SATELLITE IN |
| VIDEO | R | L |
|
|
| AUDIO |
VCR | CH3 | IN FROM ANT | VIDEO IN AUDIO IN |
| CH4 |
|
|
R L
OUT TO TV
VIDEO OUT AUDIO OUT
To receive DSS® programming:
1.Tune TV to receive line output from DSS® receiver (often called Input 1).
2.Tune DSS® receiver to desired channel.
To receive off-air programming (no cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to desired channel.
To receive off-air programming (with cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to record line output from DSS® receiver (Input1).
2.Tune DSS® receiver to desired channel.
3.Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
CAUTION
Do not stack electronic components or other objects on top of the DSS® receiver. See Safety Information, inside front cover.
11
