THE MENU SYSTEM

HOME CONTROL SETUP

Once the Data Interface module is connected to the LOW SPEED DATA port, you must tell the receiver to use this port for Home Control.

1.Press MENU•SELECT to bring up the Main menu.

2.Point to and select Options.

3.Point to and select System Options.

4.Point to and select Data Port and choose Home Control as the default setting

Device Setup

1. From the Main menu select Home Control.

Home Control can control several devices.

2. Select a device you would like to control.

Keep track of devices by assigning a label.

3.Complete the on-screen sentence using the arrow buttons and MENU•SELECT. Press MENU•SELECT to scroll through the lists of appliances and locations.

4.Use the arrow buttons and MENU•SELECT to select the house and module codes that match the device’s remote module. Select Save Setup to complete the setup.

55

Page 57
Image 57
DirecTV ProScan DSS Receiver manual Device Setup