DirecTV ProScan DSS Receiver manual Safety Information, Personnel

SAFETY INFORMATION

WARNING

To reduce risk of fire or shock hazard, do not expose this receiver to rain or moisture.

Cautions

Note to Cable TV Installer:

	TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
WARNING
	REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
RISK OF ELECTRIC SHOCK	INSIDE. REFER SERVICING TO QUALIFIED SERVICE
DO NOT OPEN	PERSONNEL.
		This symbol indicates important
This symbol indicates “dangerous
voltage” inside the product that		instructions accompanying the
presents a risk of electric shock or		product.
personal injury.

Do not stack electronic components or other objects on top of the DSS® Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.

Do not stack the DSS® receiver on top of a “hot component” such as an audio power amplifier.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

The RF remote control complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The RF remote control may not cause harmful interference and; 2) The RF remote control must accept any interference received, including interference that may cause undesired operation.

This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Note to Satellite Dish Installer:

This reminder is provided to call your attention to Article 810 and in particular article 810-15 of the National Electrical Code which covers proper installation and grounding of television receiving equipment as well as to article 820-40 of the National Electrical Code which specifies that the satellite dish cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

IMPORTANT NOTICE:	This device incorporates an anticopy process technology that is protected by
	U.S. patents and other intellectual property rights. The anticopy process is
	licensed for non-commercial, home use only. Reverse engineering or
	disassembly is prohibited.
Care and Cleaning:	Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
	DSS® receiver. Remove dust from the ventilation holes on the top and
	bottom.
	Plastic surfaces are easily scratched and can be marred by alcohol and
	various solvents. Avoid excessive use of oil-based furniture polishes since the
	materials used in the cabinet will accumulate more dust. A non-abrasive,
	anti-static cleaner/polisher is recommended.