Dish Network 6.3 manual Table of Contents, Color Pages, Quick setup, Operation, In This Guide

Table of Contents
COLOR PAGES
Quick setup
Confirm Your Receiver Model then Select the Right
Key	C-1
Install Your Selected Key	C-2
Insert the Batteries	C-2
Making the Remote Work with Your Receiver	C-3
Program the Remote to Control Your TV	C-4
Programming the Recover Button for TV2 Operation	C-5
Placing Your Remote in Limited Mode	C-6
Operation
If You Lose Your Picture	C-6
SAT Mode	C-7
TV Mode	C-8
VCR Mode	C-9
IN THIS GUIDE
Remote Control Overview	1
Using the Guide	1
Remote Control Modes	1
How the Remote Communicates	2
Programming for Other Equipment	2
Combination Equipment (for example, TV/VCR)	2
Limited Mode	3
Programming Using Equipment Code Tables	3
Scanning for Equipment Codes	4
Switching Between TV and Amplifier Volume
Control	6
Programming the Remote to Control a Second Receiver
in Aux Mode	7
Reading Out the Remote Control Codes	8
Discrete Codes for Learning Remotes	9
Avoiding Remote Conflicts	9
Changing the Remote and Receiver Address	9
Changing the UHF Frequency Using the A/B Switch (DISH
Player-DVR 942, ViP222, and ViP622 DVR Only)	10
Setting Up a TV1 UHF Pro Remote for the DISH Player-DVR
522 and 625 Only	11
Equipment Codes	13
Troubleshooting	21
Limited Warranty	23
Your Remote Control Codes	26