Control Amplifier Volume
7Press the plus (+) and minus
8The equipment’s volume changes and the AUX mode
button lights instead of the TV mode button.
Control TV Volume
7Press the plus (+) and minus
8The TV’s volume changes and the TV mode button lights instead of the AUX mode button
PROGRAMMING THE REMOTE TO CONTROL A SECOND RECEIVER IN AUX MODE
If you have another DISH Network satellite receiver installed, you can use this remote in AUX mode to control it along with your new receiver. When you program the remote to control the other receiver, the remote will send out IR and UHF (not UHF Pro) signals to the receiver. You can program the remote to control any other DISH Network satellite receiver, except for following:
•TV2 on DISH 322, DISH
•DishPlayer 7100/7200
1Turn on the other receiver and display the System Info screen (see the receiver user’s guide for information on how to display the screen).
Write down the address shown:
2Press and hold the AUX button until all the other mode buttons light up, and then let go of the button. The AUX button flashes.
3Press the 3 button.
4Use the NUMBER PAD to enter the address you wrote in step 1.
5Press POUND (#). The AUX button blinks three times.
6Press RECORD to make sure the address and the remote matches the address on the receiver.
7
