Dish Network 6.3 manual Instructions, Additional Information, Scanning For Equipment Codes

Instructions Additional Information

5Enter one of the three-digit equipment codes from the table using the number buttons.

6If you want to program Limited Mode, press 1. If not, skip to step 7.

7Press POUND (#).

8Press POWER to turn off the equipment. If the equip- ment does not turn off, go to step 10.

9Turn the equipment back on and try some other but- tons to make sure they work. If the code works for other buttons, stop here.

10If the code doesn’t work, repeat steps 3 through 9 with another equipment code from the tables.

11If you can’t find a code that works, try Scanning for Equipment Codes that follows.

The three-digit equipment code should be for the brand name of your equipment that you found in step 2.

See Limited Mode on page 3 for more information.

If you entered the code correctly, the mode button flashes three times.

If the code works, the equipment should turn off.

For example, sometimes POWER works when other

buttons don’t.

Try every code listed for your brand until one works for your equipment.

SCANNING FOR EQUIPMENT CODES

Instructions	Additional Information
1 Turn the equipment on.	Use the equipment’s front panel
	buttons or its remote control.

4