Dish Network 7100/200 manual FCC Compliance

Models: 7100/200

1 40
Download 40 pages 13.21 Kb
Page 35
Image 35

FCC Compliance

This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference that may cause unde- sired operation.

Radio Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol- lowing measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. In addition, the FCC provides a booklet that can help you. You can order the booklet from the following address:

How to Identify and Resolve Radio-TV Interference Problems

Stock No. 004-000-00345-4

U.S. Government Printing Office Washington, DC 20402

33

Page 35
Image 35
Dish Network 7100/200 manual FCC Compliance