Installation

Annunciator Outputs

12.1Description

The four annunciator outputs can be programmed to indicate the activity of the panel's zones or conditions occurring on the system. Annunciator outputs do not provide a voltage but instead switch to ground voltage from another source. The outputs can respond to any of the conditions listed below:

1)Activation by zone condition: Steady, Pulse, Momentary, or Follower

2)Manually from the Security Command keypad

3)Communication failure

4)Armed area annunciation

5)Fire Alarm or Fire Trouble

7)Ambush alarm

8)Exit and Entry timers

9)System Ready

10)Ground start activation

12.2Harness wiring

The open collector outputs are accessible by installing the DMP 300 Harness on the 4-pin header labeled J11. The output locations are shown below:

Output

Color

Wire

1

Red

1

2

Yellow

2

3

Green

3

4

Black

4

Devices connected to the outputs must be located within the same room as the XR10/XR20 panel.

Telephone RJ Connector

13.1Description

Connect the panel to the public telephone network by installing a DMP 356 RJ Cable between the panel's J4 connector and the RJ31X or RJ38X phone jack.

13.2FCC registration

The Model XR10/XR20 complies with FCC part 68 and is registered with the FCC. Registration number: CCKUSA - 18660 - AL - R

Ringer Equivalence: 1.1B

13.3Notification

Registered terminal equipment must not be repaired by the user. In case of trouble, the device must be immediately unplugged from the telephone jack. The factory warranty provides for repairs. Registered terminal equipment may not be used on party lines or in connection with coin telephones. Notification must be given to the telephone company of:

a.The particular line(s) the service is connected to

b.The FCC registration number

c.The ringer equivalence

d.The make, model, and serial number of the device

XR10/XR20 Installation Guide

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

Page 9

Page 12 Page 14
Page 13
Image 13
DMP Electronics LT-0229 (5 97) Annunciator Outputs, Telephone RJ Connector, Harness wiring, FCC registration, Notification
Page 12 Page 14

LT-0229 (5 97) specifications

The DMP Electronics LT-0229 (5 97) is a high-performance electronic device designed to cater to a variety of applications, primarily in the realm of industrial automation and control systems. Renowned for its durability, efficiency, and advanced features, the LT-0229 has established itself as a reliable choice among professionals in various sectors.

One of the key features of the LT-0229 is its robust build quality. Manufactured with high-grade materials, this device is engineered to withstand harsh environments, ensuring longevity and minimal maintenance needs. Its rugged exterior is complemented by superior internal components that provide consistent performance even under challenging conditions.

The LT-0229 integrates cutting-edge technologies that enhance its operational capabilities. For instance, it comes equipped with advanced signal processing algorithms that enable precise data acquisition and analysis. This capability is especially useful in applications that demand high accuracy, such as in manufacturing processes and quality control assessments.

Another defining characteristic of the DMP Electronics LT-0229 is its versatility. The device supports multiple communication protocols, including RS-232, RS-485, and Ethernet, allowing it to seamlessly integrate into existing systems. This feature simplifies connectivity with various sensors and actuators, making the LT-0229 a flexible option for automation needs.

Furthermore, the LT-0229 boasts an intuitive user interface that facilitates easy operation. The interface is designed to provide user-friendly navigation, enabling operators to quickly configure settings, monitor performance, and troubleshoot issues. This ease of use contributes to reduced downtime and enhanced productivity in operational environments.

In terms of energy efficiency, the LT-0229 is designed to minimize power consumption without compromising performance. This characteristic is particularly beneficial for organizations looking to reduce operational costs and enhance sustainability efforts. The device's power-saving features not only lower energy expenses but also contribute to a reduced environmental impact.

Overall, the DMP Electronics LT-0229 (5 97) stands out as a premier choice in the electronic device market. With its robust construction, advanced technologies, versatility in communication, user-friendly interface, and energy efficiency, it is well-suited to meet the demands of modern industrial applications. This makes it an essential tool for professionals seeking reliability and efficiency in their electronic solutions. Whether for large-scale production lines or smaller automated systems, the LT-0229 promises to deliver top-tier performance across various settings.
Top Page Image Contents