DMP Electronics XR2500F manual Accessory Devices

Installation

10.3 Accessory Devices

Interface Adaptor and Interface Cards

461 Interface Adaptor Card	Allows you to connect two or more expansion interface cards to the XR2500F panel. The 461 is an
	expansion board that plugs into the panel J6 Interface Connector and is required when using two or more
	Interface Cards. Use combinations of Interface Cards for expanding zones, network interfacing, and local
	printing.
462N Network Interface Card	Allows you to connect the XR2500F to any compatible data network and use its communication capability
	in place of standard dial out telephone lines. The 462N also provides an LX-Bus™ for connecting zone and
	output expansion modules to the panel.
462P Printer Interface Card	Allows you to connect the XR2500F to any compatible serial printer providing the user with real-time event
	recording. The 462P also provides an LX-Bus™ for connecting zone and output expansion modules.
463G Digital Cellular Communicator	Allows you to connect the XR2500F to any compatible GPRS/SMS network and use its communication in
Card	place of standard dial out lines. The 463G also provides and LX-Bus™ for connecting zone and output
	expansion modules to the panel.
481 Expansion Interface Card	Provides one LX-Bus for connecting up to 100 zone and output expansion modules.
Zone and Output Expansion Modules
710/710F Bus Splitter/Repeater	Allows you to increase keypad or LX-Bus™ wiring distance to 2500 feet. Model 710F is for 24 VDC
	applications.
711 Single Point Zone Expanders	Provides one Class B zone for connecting devices.
714, 714-8, 714-16 Zone Expanders	Provides Class B zones for connecting non-powered fire devices.
715, 715-8, 715-16 Zone Expanders	Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other
	2- or 4-wire devices.
725 Zone Expanders	Provides 24 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other 2-
	or 4-wire devices. Requires 710F Bus Splitter/Repeater.
716 Output Expander	Provides four Form C relays (SPDT) and four switched grounds (open collector) for use in a variety of
	remote annunciation and control applications.
717 Graphic Annunciator Module	Provides 20 zone following annunciator outputs (open collector) for use in a variety of remote annunciation
	and control applications for use on the keypad bus only.
733, 734 Wiegand Interface Cards	Provides system codeless entry, and arming and disarming using access control readers.
Indicating and Initiating Devices
865 Supervised Style W or X	Provides supervised alarm current when using the XR2500F panel bell output and up to 5 Amps at 12 or 24
Notification Circuit Module	VDC when using a listed auxiliary power supply. The 865 can supervise 2-wire or 4-wire style circuits for
	opens and shorts with individual LED annunciation.
866 Style W Notification Circuit	Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
Module	when using a listed auxiliary power supply. The 866 can supervise 2-wire Style W circuits for opens and
	shorts.
867 Style W LX-Bus Notification	Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
Circuit Module	when using a listed auxiliary power supply. The 867 connects to the XR2500F panel LX-Bus™ and provides
	one 2-wire Style W notification circuit for open and short conditions. Individual Bell Relay addresses Bell
	Ring styles.
869 Dual Class A Style D Initiating	Provides two Class A, Style D, 4-wire initiating zones for connecting waterflow switches and other
Module	non‑powered fire and burglary devices.
Accessory Modules and Keypads
893A Dual Phone Line Module	Allows you to supervise two standard phone lines connected to an XR2500F panel. The 893A module
	monitors the main and backup phone lines for a sustained voltage drop and alerts users when the phone
	line is bad.
* ePAD™ Virtual Keypads	Allows users to control the security system from any computer in the world using the Internet.
LCD keypads	Allows you to control the panel from various remote locations. Connect up to sixteen supervised Model
	630F Remote Fire Command Center, Model 690, 790, 693/793 Security Command™ keypads, 7060, 7063,
	7070, 7073, 7160, 7163, 7170, 7173 Thinline™ keypads, 7060A, 7063A, 7070A, 7073A Aqualite™ keypads,
	or 7760 Clear Touch™ keypad to the keypad bus using terminals 7, 8, 9, and 10.
Addressable Smoke Detectors
521LX, 521LXT	Single-zone, addressable module conventional smoke/smoke heat detectors that connect to the LX-Bus.
	Includes remote maintenance reporting, drift compensation, and multi-criteria detection.
* These devices have not been investigated and shall not be used in listed installations.
	Table 5: Accessory Devices

Digital Monitoring Products XR2500F Installation Guide

14