The Security Command Keypad
Your system may have one or more easy to use Security Command keypads (16 or 32 character) that allow you to properly operate the system. The illustration and descriptions below highlight some of the keypad features:
Data Entry keys
These keys allow you to enter your user code when arming or disarming or enter other information into the system.
The ARROW key
The ARROW key is used to go back through the keypad displays while operating your system. You can press the ARROW key to back up through the list of functions in the User Menu or to make a
AC
LED | POWER | JONES RESIDENCE | ||||
| ||||||
| ARMED | F R I | 2 : 51 | AM |
| |
Armed |
|
|
|
|
|
|
LED |
|
|
|
|
|
|
|
| 1 | 2 | 3 |
| 4 |
|
| AB C |
| D E F | G H I | J K L |
|
| 5 | 6 | 7 |
| 8 |
|
| MN O |
| P Q R | S T U | V W X |
|
| 9 | 0 |
|
| COMMAND |
|
| Y Z |
|
|
|
|
1 | 2 | 3 | 4 | POWER |
| ||||
A B C | DEF | GHI | JKL |
|
5 | 6 | 7 | 8 |
|
MNO | PQR | STU | VWX |
|
9 | 0 |
| COMMAND |
|
YZ |
|
|
|
|
Lighted display SELECT keys Data Entry keys COMMAND key ARROW key
Lighted display SELECT keys Data Entry keys
AC LED COMMAND key ARROW key
correction by erasing the last character you entered.
The COMMAND key
The COMMAND key allows you to advance through the keypad displays or User Menu or complete a data entry function.
AC LED
This LED remains on steady as long as your system is connected to its AC power supply. Should there be an interruption, the LED turns off and the system's backup battery maintains normal operation for a time allowing you to contact our service department.
ARMED LED
This LED is ON steady anytime burglary protection is armed and OFF when ALL areas are disarmed.
32-Character Keypad User Options Menu
Press and hold the ARROW and COMMAND keys for about two seconds. The keypad display shows SET BRIGHTNESS. Use the left SELECT key to lower the display brightness. Use the right SELECT key to increase the display brightness. Press COMMAND.
The SELECT keys
There are four keys under the display called the SELECT keys. These keys are one of the features that make your system so easy to operate. They allow you to choose what to do by pressing the SELECT key under choices being shown in the display.
At SET TONE, use the left SELECT key to lower the keypad tone. Use the right SELECT key to raise the keypad tone. Press COMMAND.
At SET VOLUME LEVEL, use the left SELECT key to lower the keypad volume. Use the right SELECT key to raise the keypad volume. Press the ARROW key to exit out of the User Options menu.
2 | Introduction |
|