F – Compatibility Language

Compatibility

Command

ASTS?

CLR

DC 0 1

DLY <n>

DSP 0 1

ERR?

FAULT?

ID?

IOUT?

ISET <n>

OCP 0 1

OUT 0 1

Table F-2. COMPatibility Commands

Description

This command reads the contents of the accumulated status register, which stores any bit condition entered in the status register since the accumulated status register was last read, regardless of whether the condition still exists.

Data Representation: ZZZZD

This command initializes the dc source to the power-on state. It also resets the PON bit in the serial poll register. The command performs the same function as the Device Clear (DCL) interface message.

Only applies to units with Relay Option 760. This command enables or disables the output without affecting the state of the output relays. Initial condition: DC 1

This command programs the delay time between the programming of an output change that produces a CV, CC, or an UNREG condition, and the recording of that condition by the status registers. This can be used to prevent false triggering of the OverCurrent Protection feature (OCP).

Initial delay: 0.08s (Normal); 0.008s (Fast).

This command enables or disables the dc source’s front panel display. Initial condition: DSP 1

This command determines the type of programming error detected by the dc source. A remote programming error sets the ERR bit in the status register, which can be enabled by UNMASK to request service.

This command reads which bits have been set in the fault register. A bit is set in the fault register when the corresponding bit in the status register changes from inactive to active AND the corresponding bit in the mask register has been enabled. The fault register is reset only after it has been read. The decimal equivalent of the total bit weight of all enabled bits is returned.

Data Representation: ZZZZD

This command causes the dc source to report its model number and any options that affect the dc source’s output.

Data Representation: Agilent663XA

This command measures and returns the actual output current. Data Representation: SD.DDDD

This command programs the output current. See Table 8-3 for the programming range of this command. Initial condition: Table F-1

This command enables or disables the dc source’s overcurrent protection. If this function is enabled and the dc source goes into

CCmode, the output of the dc source is disabled. Initial condition: OCP 0

This command enables or disables the dc source’s output. The dc source will be able to implement commands even while the output is disabled. Initial condition: OUT 1

Similar SCPI

Command

STAT:OPER?

STAT:QUES?

*ESE?

*RST

OUTP:STAT[:NOR

]

0 1 OFF ON

OUTP:PROT:DEL

DISP 01OFFON

SYST:ERR?

STAT:OPER?

STAT:QUES?

*ESE

*IDN?

MEAS:CURR?

CURR

CURR:PROT:STAT 0 1 OFF ON

OUTP:STAT

0 1 OFF ON

178

Page 177 Page 179
Page 178
Image 178
Agilent Technologies 66309B, D, 66311B Compatibility Command, Similar Scpi Command, 178, Table F-2. COMPatibility Commands
Page 177 Page 179

66111A, 66309B, 66311B, D specifications

Agilent Technologies D,c,83440b is an advanced electronic measurement solution designed for engineers and scientists who require precise and reliable performance in their testing environments. This modular test system offers a comprehensive suite of features that cater to a wide range of applications, from high-frequency testing to complex signal analysis.

One of the main features of the D,c,83440b is its impressive frequency range, allowing users to conduct tests across a wide spectrum of signals. The system is capable of handling frequencies up to 26.5 GHz, making it ideal for RF and microwave applications. This broad range ensures that users can work with a variety of devices, including communication systems, radar, and satellite technology.

In addition to its frequency capabilities, Agilent Technologies has engineered the D,c,83440b with exceptional dynamic range and low noise figures. This ensures that even the smallest signals can be accurately measured, allowing for greater precision in testing. The full spectrum analysis feature enables users to capture transient events and analyze them in real-time, which is crucial for troubleshooting and performance evaluations.

The D,c,83440b is built on a modular platform, allowing users to customize their systems according to specific testing needs. This modularity not only enhances flexibility but also simplifies maintenance and upgrades. Users can easily swap out different modules without the need for extensive system reconfiguration, which can significantly reduce downtime in testing environments.

Another standout characteristic of the D,c,83440b is its user-friendly interface. With a large, high-resolution display and intuitive controls, engineers can quickly navigate through settings and data, streamlining the testing process. This ease of use is complemented by powerful software solutions that can automate test sequences, aiding in efficiency and accuracy.

The integration of advanced digital signal processing technologies further enhances the capabilities of the D,c,83440b. These technologies enable more sophisticated measurements and improved signal integrity, which is essential for modern communication systems.

In summary, the Agilent Technologies D,c,83440b is a multifaceted electronic measurement solution that boasts a wide frequency range, excellent dynamic range, modular design, and user-friendly interface. This combination of features makes it suitable for various applications, ensuring that engineers and scientists have the tools they need to succeed in their testing and measurement endeavors.
Top Page Image Contents