Measurement Measures output channel 1 Measures output channel 2

Front Panel Operation - 5

System Keys

Refer to the examples later in this chapter for more details on the use of these keys.

Local

Address

Recall

 

Shift

Channel

 

SYSTEM

Channel

Error

Local

Address

 

 

Save

 

Recall

Figure 5-2. System Keys

This is the blue, unlabeled key, which is also shown as Shift in this guide. Pressing this key accesses the alternate or shifted function of a key (such as ERROR ). Release the key after you press it. The Shift annunciator is lit, indicating that the shifted keys are active.

Press to change the dc source’s selected interface from remote operation to local (front panel) operation. Pressing the key will have no effect if the interface state is already Local, Local-with-Lockout, or Remote-with-Lockout.

Press to access the address menu. All entries are stored in non-volatile memory.

Display

Command Function

ADDRESS <value>

Sets the GPIB Address

INTF <char>

Selects an interface (GPIB or RS-2321)

BAUDRATE <char>

Selects baudrate (300, 600, 1200, 2400, 4800, 9600)1

PARITY <char>

Message parity (NONE EVEN ODD MARK SPACE)1

FLOW <char>

Flow control (XON-XOFF RTS-CTS DTR-DSR NONE)1

LANG <char>

Selects language (SCPI or COMP1)

REMOTE FP <char>

Enable/disable Agilent14575A front panel interface (ON or

 

OFF)

ROM <char>

Firmware revision number

SN: <char>

Unit serial number

Press to place the dc source into a previously stored state. You can recall up to 4 previously stored states (0 through 3).

Pressing these keys toggles the display between output 1 and output 2.

Shift

 

Error

 

 

 

 

 

Shift

 

Save

 

 

 

Notes:

Display

1<reading>V <reading>A

2<reading>V <reading>A

Press to display the system error codes stored in the SCPI error queue. This action also clears the queue. If there is no error in the queue, 0 is displayed.

Press to store an existing dc source state in non-volatile memory. The parameters saved are listed under *SAV as described in chapter 8. You can save up to 4 states (0 through 3).

1 Not valid for Agilent 66309B/D

value = a numeric value

char = a character string parameter

Use

p

and

q

to scroll through the command list.

»

…

Use

 

and

 

to scroll through the parameter list.

51

Page 50 Page 52
Page 51
Image 51
Agilent Technologies 66111A, 66311B, 66309B manual System Keys, Display Command Function, Off
Page 50 Page 52

66111A, 66309B, 66311B, D specifications

Agilent Technologies D,c,83440b is an advanced electronic measurement solution designed for engineers and scientists who require precise and reliable performance in their testing environments. This modular test system offers a comprehensive suite of features that cater to a wide range of applications, from high-frequency testing to complex signal analysis.

One of the main features of the D,c,83440b is its impressive frequency range, allowing users to conduct tests across a wide spectrum of signals. The system is capable of handling frequencies up to 26.5 GHz, making it ideal for RF and microwave applications. This broad range ensures that users can work with a variety of devices, including communication systems, radar, and satellite technology.

In addition to its frequency capabilities, Agilent Technologies has engineered the D,c,83440b with exceptional dynamic range and low noise figures. This ensures that even the smallest signals can be accurately measured, allowing for greater precision in testing. The full spectrum analysis feature enables users to capture transient events and analyze them in real-time, which is crucial for troubleshooting and performance evaluations.

The D,c,83440b is built on a modular platform, allowing users to customize their systems according to specific testing needs. This modularity not only enhances flexibility but also simplifies maintenance and upgrades. Users can easily swap out different modules without the need for extensive system reconfiguration, which can significantly reduce downtime in testing environments.

Another standout characteristic of the D,c,83440b is its user-friendly interface. With a large, high-resolution display and intuitive controls, engineers can quickly navigate through settings and data, streamlining the testing process. This ease of use is complemented by powerful software solutions that can automate test sequences, aiding in efficiency and accuracy.

The integration of advanced digital signal processing technologies further enhances the capabilities of the D,c,83440b. These technologies enable more sophisticated measurements and improved signal integrity, which is essential for modern communication systems.

In summary, the Agilent Technologies D,c,83440b is a multifaceted electronic measurement solution that boasts a wide frequency range, excellent dynamic range, modular design, and user-friendly interface. This combination of features makes it suitable for various applications, ensuring that engineers and scientists have the tools they need to succeed in their testing and measurement endeavors.
Top Page Image Contents