0 or OFF
1 or ON

Language Dictionary - 8

INITiate:CONTinuous:SEQuence1

INITiate:CONTinuous:NAME TRANsient

These commands control the output transient trigger system. continuously initiates the output trigger system..

turns off continuous triggering. In this state, the output trigger system must be initiated for each trigger using INITiate:SEQuence.

Command Syntax

INITiate:CONTinuous:SEQuence1 <bool>

 

INITiate:CONTinuous:NAME TRANsient <bool>

Parameters

0 1 OFF ON

 

Examples

INIT:CONT:SEQ ON

INIT:CONT:NAME TRAN, 1

Related Commands

ABOR INIT TRIG

TRIG:SEQ:DEF *TRG

TRIGger

This command generates a BUS trigger for the output transient trigger system. If the transient trigger system is enabled, the trigger will then:

1.Initiate a pending level change as specified by CURRent:TRIGger or VOLTage;TRIGger.

2.Clear the WTG bit in the Status Operation Condition register after both transient and acquire trigger sequences have completed. (WTG is the logical-or of both transient and acquire sequences.)

3.If INITiate:CONTinuous ON has been programmed, the trigger subsystem is immediately re-enabled for subsequent triggers. As soon as it is cleared, the WTG bit is again set to 1.

Command Syntax

TRIGger[:SEQuence1][:IMMediate]

 

TRIGger[:TRANsient][:IMMediate]

Parameters

None

 

 

Examples

TRIG

TRIG:IMM

 

Related Commands

ABOR

CURR:TRIG INIT

*TRG VOLT:TRIG

TRIGger:SOURce

This command selects the trigger source for the output transient trigger system. Since BUS is the only trigger source for transient triggers, this command does not need to be used. It is included for completeness only.

BUS

GPIB device, *TRG, or <GET> (Group Execute Trigger)

 

Command Syntax

TRIGger[:SEQuence1]:SOURce<source>

 

 

TRIGger[:TRANsient]:SOURce<source>

 

Parameters

BUS

 

*RST Value

BUS

 

Examples

TRIG:SOUR BUS

 

Query Syntax

TRIGger[:SEQuence1]:SOURce?

 

 

TRIGger[:TRANsient]:SOURce?

 

Returned Parameters

<CRD>

127

Page 126 Page 128
Page 127
Image 127
Agilent Technologies 66111A, D, 66311B, 66309B manual TRIGgerSOURce, 127
Page 126 Page 128

66111A, 66309B, 66311B, D specifications

Agilent Technologies D,c,83440b is an advanced electronic measurement solution designed for engineers and scientists who require precise and reliable performance in their testing environments. This modular test system offers a comprehensive suite of features that cater to a wide range of applications, from high-frequency testing to complex signal analysis.

One of the main features of the D,c,83440b is its impressive frequency range, allowing users to conduct tests across a wide spectrum of signals. The system is capable of handling frequencies up to 26.5 GHz, making it ideal for RF and microwave applications. This broad range ensures that users can work with a variety of devices, including communication systems, radar, and satellite technology.

In addition to its frequency capabilities, Agilent Technologies has engineered the D,c,83440b with exceptional dynamic range and low noise figures. This ensures that even the smallest signals can be accurately measured, allowing for greater precision in testing. The full spectrum analysis feature enables users to capture transient events and analyze them in real-time, which is crucial for troubleshooting and performance evaluations.

The D,c,83440b is built on a modular platform, allowing users to customize their systems according to specific testing needs. This modularity not only enhances flexibility but also simplifies maintenance and upgrades. Users can easily swap out different modules without the need for extensive system reconfiguration, which can significantly reduce downtime in testing environments.

Another standout characteristic of the D,c,83440b is its user-friendly interface. With a large, high-resolution display and intuitive controls, engineers can quickly navigate through settings and data, streamlining the testing process. This ease of use is complemented by powerful software solutions that can automate test sequences, aiding in efficiency and accuracy.

The integration of advanced digital signal processing technologies further enhances the capabilities of the D,c,83440b. These technologies enable more sophisticated measurements and improved signal integrity, which is essential for modern communication systems.

In summary, the Agilent Technologies D,c,83440b is a multifaceted electronic measurement solution that boasts a wide frequency range, excellent dynamic range, modular design, and user-friendly interface. This combination of features makes it suitable for various applications, ensuring that engineers and scientists have the tools they need to succeed in their testing and measurement endeavors.
Top Page Image Contents