8 – Language Dictionary

[SOURce:]VOLTage2

Agilent 66309B/D only

This command sets the output voltage level of the auxiliary output.

Command Syntax

[SOURce:]VOLTage2[:LEVel][:IMMediate][:AMPLitude]<NRf+>

Parameters

see Table A-3

 

Default Suffix

V (volts)

 

*RST Value

0

 

Examples

VOLT2 500mV

!set output2 voltage to 0.5V

Query Syntax

[SOURce:]VOLTage2[:LEVel][:IMMediate][:AMPLitude]?

Returned Parameters

<NR3>

 

[SOURce:]VOLTage:PROTection

This command sets the overvoltage protection (OVP) level of the dc source. If the output voltage exceeds the OVP level, then the dc source output is disabled and the Questionable Condition status register OV bit is set (see chapter 7 about programming the status registers). An overvoltage condition can be cleared with the OUTP:PROT:CLE command after the condition that caused the OVP trip is removed. The OVP always trips with zero delay and is unaffected by the OUTP:PROT:DEL command. The OVP function can be disabled using the VOLT:PROT:STAT command.

Command Syntax

[SOURce:]VOLTage:PROTection[:LEVel]<NRf+>

Parameters

see Table 8-3

 

Default Suffix

V (volts)

 

*RST Value

MAX

 

Examples

VOLT:PROT 21 !set voltage protect to 21V

Query Syntax

[SOURce:]VOLTage:PROTection[:LEVel]?

Returned Parameters

<NR3>

 

Related Commands

OUTP:PROT:CLE

VOLT:PROT:STAT

[SOURce:]VOLTage:PROTection:STATe

This command enables or disables the overvoltage protection (OVP) function.

CAUTION: Disabling the overvoltage protection function may cause excessive output voltages, such as can occur if remote sense leads are disconnected, to damage the equipment under test.

Command Syntax

Parameters

*RST Value

Examples

[SOURce:]VOLTage:PROTection:STATe <bool> 0 1 OFF ON

OFF

VOLT:PROT:STAT 0 !voltage protection is OFF VOLT:PROT:STAT 1 !voltage protection is ON

Query Syntax

[SOURce:]VOLTage:PROTection:STATe?

Returned Parameters

<NR1>0 or 1

Related Commands

OUTP:PROT:CLE *RST VOLT:PROT

120

Page 119 Page 121
Page 120
Image 120
Agilent Technologies D, 66311B, 66309B, 66111A manual SOURceVOLTage2, SOURceVOLTagePROTectionSTATe, 120
Page 119 Page 121

66111A, 66309B, 66311B, D specifications

Agilent Technologies D,c,83440b is an advanced electronic measurement solution designed for engineers and scientists who require precise and reliable performance in their testing environments. This modular test system offers a comprehensive suite of features that cater to a wide range of applications, from high-frequency testing to complex signal analysis.

One of the main features of the D,c,83440b is its impressive frequency range, allowing users to conduct tests across a wide spectrum of signals. The system is capable of handling frequencies up to 26.5 GHz, making it ideal for RF and microwave applications. This broad range ensures that users can work with a variety of devices, including communication systems, radar, and satellite technology.

In addition to its frequency capabilities, Agilent Technologies has engineered the D,c,83440b with exceptional dynamic range and low noise figures. This ensures that even the smallest signals can be accurately measured, allowing for greater precision in testing. The full spectrum analysis feature enables users to capture transient events and analyze them in real-time, which is crucial for troubleshooting and performance evaluations.

The D,c,83440b is built on a modular platform, allowing users to customize their systems according to specific testing needs. This modularity not only enhances flexibility but also simplifies maintenance and upgrades. Users can easily swap out different modules without the need for extensive system reconfiguration, which can significantly reduce downtime in testing environments.

Another standout characteristic of the D,c,83440b is its user-friendly interface. With a large, high-resolution display and intuitive controls, engineers can quickly navigate through settings and data, streamlining the testing process. This ease of use is complemented by powerful software solutions that can automate test sequences, aiding in efficiency and accuracy.

The integration of advanced digital signal processing technologies further enhances the capabilities of the D,c,83440b. These technologies enable more sophisticated measurements and improved signal integrity, which is essential for modern communication systems.

In summary, the Agilent Technologies D,c,83440b is a multifaceted electronic measurement solution that boasts a wide frequency range, excellent dynamic range, modular design, and user-friendly interface. This combination of features makes it suitable for various applications, ensuring that engineers and scientists have the tools they need to succeed in their testing and measurement endeavors.
Top Page Image Contents