E

Line Voltage Conversion

WARNING: Shock Hazard. Operating personnel must not remove instrument covers. Component replacement and internal adjustments must be made only by qualified service personnel.

Open the Unit

♦Turn off ac power and disconnect the power cord from the unit.

♦Use a #15 Torx drive and remove the two screws on the bottom of the unit. If your unit has feet, you will need to remove one of the feet to access the screw.

♦Use a #15 Torx drive and loosen the two screws on the rear bezel and remove the bezel.

♦Slide the cover toward the back of the unit and remove it.

Configure the Power Transformer

♦Locate the ac input wiring harness on the left side of the transformer

♦Use a needle nose pliers and connect the ac input wiring harness according to the information in figure E-1 on the following page.

Install the Correct Line Fuse

♦Install the correct line fuse. The fuse is located on the pc board directly behind the ac line switch and is labeled F301.

For 100/120 Vac operation: 3.15 AT (time delay); part number 2110-0638

For 220/230 Vac operation: 1.6 AT (time delay); part number 2110-0773

♦Mark the voltage setting that the unit has been set to on the rear panel label.

Close the Unit

♦Slide the cover over the unit toward the front.

♦Place the bezel on the rear of the unit and tighten the two screws using a #15 Torx drive.

175

Page 174 Page 176
Page 175
Image 175
Agilent Technologies 66111A Open the Unit, Configure the Power Transformer, Install the Correct Line Fuse, Close the Unit
Page 174 Page 176

66111A, 66309B, 66311B, D specifications

Agilent Technologies D,c,83440b is an advanced electronic measurement solution designed for engineers and scientists who require precise and reliable performance in their testing environments. This modular test system offers a comprehensive suite of features that cater to a wide range of applications, from high-frequency testing to complex signal analysis.

One of the main features of the D,c,83440b is its impressive frequency range, allowing users to conduct tests across a wide spectrum of signals. The system is capable of handling frequencies up to 26.5 GHz, making it ideal for RF and microwave applications. This broad range ensures that users can work with a variety of devices, including communication systems, radar, and satellite technology.

In addition to its frequency capabilities, Agilent Technologies has engineered the D,c,83440b with exceptional dynamic range and low noise figures. This ensures that even the smallest signals can be accurately measured, allowing for greater precision in testing. The full spectrum analysis feature enables users to capture transient events and analyze them in real-time, which is crucial for troubleshooting and performance evaluations.

The D,c,83440b is built on a modular platform, allowing users to customize their systems according to specific testing needs. This modularity not only enhances flexibility but also simplifies maintenance and upgrades. Users can easily swap out different modules without the need for extensive system reconfiguration, which can significantly reduce downtime in testing environments.

Another standout characteristic of the D,c,83440b is its user-friendly interface. With a large, high-resolution display and intuitive controls, engineers can quickly navigate through settings and data, streamlining the testing process. This ease of use is complemented by powerful software solutions that can automate test sequences, aiding in efficiency and accuracy.

The integration of advanced digital signal processing technologies further enhances the capabilities of the D,c,83440b. These technologies enable more sophisticated measurements and improved signal integrity, which is essential for modern communication systems.

In summary, the Agilent Technologies D,c,83440b is a multifaceted electronic measurement solution that boasts a wide frequency range, excellent dynamic range, modular design, and user-friendly interface. This combination of features makes it suitable for various applications, ensuring that engineers and scientists have the tools they need to succeed in their testing and measurement endeavors.
Top Page Image Contents