1 - Quick Reference
18
Front Panel Annunciators
CV Output 1 or output 2 is operating in constant voltage mode.
CC Output 1 or output 2 is operating in constant current mode.
Unr Output 1 or output 2 is unregulated.
Dis The output is OFF. Press the Output On/Off key to turn the output on.
OCP The over-current protection state is ON. Press the OCP key to turn over-current
protection off.
Prot Indicates that the output has been disabled by one of the protection features.
Press the Prot Clear key to clear the protection condition.
Cal Calibration mode is ON. Scroll to the Cal Off command and press the Enter key
to exit the calibration mode.
Shift The Shift key has been pressed.
Rmt The remote programming interface (GPIB or RS-232) is active. Press the Local
key to return the unit to front panel control.
Addr The interface is addressed to talk or listen.
Err There is an error in the SCPI error queue. Press the Error key to view the error
code.
SRQ The interface is requesting service.
Immediate Action Keys
Toggles the output of the selected output between the ON and OFF states.
When coupled, turns both output channels ON or OFF.
Activates front panel control when the unit is in remote mode (unless a Lockout
command is in effect).
Resets the protection circuit and allows the unit to return to its last programmed
state.
A toggle switch that enables or disables overcurrent protection.
Output
On/Off
Local
Prot ClrShift
OCP
Shift