21
2
General Information

Document Orientation

This manual describes the operation of the Agilent Model 66111A Fast Transient, the Agilent Model
66311B/D Mobile Communications, and the Agilent Model 66309B/D Dual Output DC Source. Agilent
Models 66311D and 66309D have an additional DVM measurement input on the rear panel. Unless
otherwise noted, these models will be referred to by the description "dc source" throughout this manual.
The following Getting Started Map will help you find the information you need to complete the specific
task that you want to accomplish. Refer to the table of contents or index of each guide for a complete list
of the information contained within.
Getting Started Map
Task Where to find information
Quick Reference Section Chapter 1
General information
Model differences
Capabilities and characteristics
Chapter 2
Installing the unit
Line connections
Computer connections
Load connections
Chapter 3
Checking out the unit
Verifying proper operation
Using the front panel
Calibrating the unit
Chapter 4
Using the front panel
Front panel keys
Front panel examples
Chapter 5
Using the programming interface
GPIB interface
RS-232 interface
Chapter 6
Programming the unit using SCPI (and
COMPatibility) commands
SCPI commands
SCPI programming examples
SCPI language dictionary
Chapters 7 and 8 for SCPI commands.
Appendix D for SCPI examples
Appendix F for COMPatibility commands
Installing the VXIplug&play instrument driver
NOTE: The driver must be installed on your pc to access
the on-line information. Drivers are available on the web
at www.agilent.com/find/drivers.
Chapter 6