DP564 Multichannel Audio Decoder
2-1
Chapter 2 Installation
This chapter covers the physical connections necessary to operate the DP564.

2.1 Mounting

The DP564 occupies 2U of rack space. The unit operates at ambient temperatures up
to 122° F (50° C) and vents from front to rear.
Caution: Do not mount the DP564 directly above heat-generating equipment.
Ensure adequate ventilation. The temperature inside a poorly ventilated
rack can be considerably higher than ambient room temperature.

2.2 Rear-Panel Connections

The rear-panel connections include BNC inputs and outputs, an optical input, serial
ports, analog audio outputs, and the power supply. It is best to make all other
connections before connecting the power supply.

2.2.1 BNC Connectors

Figure 2-1 shows the BNC connectors. These are compliant with the AES3-ID
standard.
C/Sw
AESRef
AESRef
DigitalInDigitalIn
Ls/RsL/R Bsl/Bsr
LTCOut
LTC Out
AES1AES1 AES2AES2
DigitalOutDigitalOut
Figure 2-1 Connection Ports for Digital Signals
The AES Ref connectors are for an AES3 external reference. Connect an AES3
reference signal to either port. The other connector may be used to pass the reference