DP564 Multichannel Audio Decoder Menus
4-16
To enter text:
1. Press ► to select Del, then Enter to delete the text to the left of the flashing
cursor.
When the letter characters appear uppercase, ↓ changes them to lowercase.
From the lowercase display, ↑ changes the letters to uppercase. Space inserts
a single character space, Clear erases the whole text entry field.
2. Press the arrow buttons to select a letter or symbol, then Enter.
The letter displays in the text entry field above the selection box.
3. When you have completed the entry, select OK and press Enter.
Unit Address
The unit address allows each DP564 to be uniquely identified when using the
software remote over a serial connection using either the RS-232 or the RS-485
connection. You can connect more than one to the same RS-485 link and control
them using one DolbyRemote 564, provided that each unit is assigned a unique
address. To change the unit address, enter the Unit Address menu, then use the
▲▼ buttons to change individual characters, and the ◄► buttons to move between
characters in the address. When you have the setting you need, press Enter.
Timecode Display
Use the Timecode Display menu to designate the timecode information to
display on the main status menu when processing a Dolby Digital signal. A separate
status menu, Timecode Status, displays all the available timecode information.
Screensaver Timeout
After a period of inactivity, the DP564 applies a screensaver to the display to preserve
display life. Use the Screensaver Timeout menu to set the period of inactivity
before the screensaver activates.
Screensaver Design
Use the Screensaver Design menu to choose between the Dolby logo and the unit
name when the DP564 activates the screensaver.
Network Settings
To activate the streaming audio input or to use the DolbyRemote 564 software by
network connection, you need to configure the DP564 using the Network
Settings menu.