
DP564 Multichannel Audio Decoder Menus
4-12
4.4.3 User Presets The DP564 stores up to 32 presets. Each preset includes all active settings. If you
recall a preset, then change one parameter, the configuration with the one changed
parameter is not stored unless you save it as a separate preset. Presets 29–32 are
reserved by the factory configurations shown in Table 4-2.
Note: The factory ships the DP564 with these same presets saved as presets 1–4,
respectively, so initially you can apply these presets by pressing the front-
panel Preset buttons. Presets 1–4 can be reset, of course, to suit your
requirements.
Table 4-2 Factory-Reserved Presets
Manual
Detection
Mode Auto Detection
Mode
Lo/Ro
Downmix
Line Mode
Lt/Rt Downmix
Line Mode
Pro Logic
Decode
Preset Number 29 30 31 32
Preset Name Manual Ctrl Auto Ctrl Stereo
Dwnmx Lt/Rt
Decode
Parameter Setting
Monitor Control–
Pro Logic Manual Auto Manual Manual
Monitor Control–
Surround EX Manual Auto Manual Manual
Pro Logic Decode Off - Off On
Surround EX
Decode Off - - -
Lo/Ro Downmix Off Off On -
Lt/Rt Downmix Off Off - On
Line Mode Off Off On On
RF Off Off - -
Custom Off Off - -
The User Preset menu includes Recall Preset and Save Preset.
Recall Preset
You can recall any preset by entering the Recall Preset menu, scrolling to select
the preset you want to use, and pressing Enter.
You can recall preset 1, 2, 3, or 4 by pressing the appropriate front-panel Preset
button. When you recall a preset, an activation message appears briefly in the middle
of the display, showing the preset name and number. When you use a front-panel
Preset button to activate preset 1, 2, 3, or 4, the display remains on the menu you are