DP564 Multichannel Audio Decoder Installation
2-3
2.2.3 Analog Outputs The +4 dBu balanced Analog Audio Outputs connect directly to your monitoring
system. Each connector is labeled according to the channel signal it sends.
If your system includes a single speaker for Back Surround, use only the Bsl output,
and leave the Bsr output open.
2.2.4 Power The main fuse rating is:
T 1A L (1 amp, 250 V, 20 mm, time-lag, low breaking capacity) for all operating
voltages.
WARNING: Before applying power, check the main fuse using the procedure on
page ix.
There is no power switch on the DP564. To apply power, connect the power cord to a
live outlet.