Dolby Laboratories DP600 Using the DP600

Dolby® DP600 Program Optimizer Manual 9
Chapter 2
Using the DP600
2.1 Installing the DP600 Hardware
ToinstalltheDolby®DP600:
1. ConnecttheprovidedUSBkeyboardtotheDP600front‐panelUSBportoroneofthe
rear‐panelUSBports.
Figure2‐1
Figure 2-1 Connect DP600 Keyboard (Front-Panel connection)
2. ConnectoneendoftheprovidedEthernetcabletotheupperEthernetport(port0)on
theDP600rearpanel.
3. ConnecttheotherendoftheprovidedEthernetcabletoyournetwork.
4. Connectbothpowersuppliestoapowersourceusingtheprovidedpowercables.
Figure2‐2
Figure 2-2 Connect DP600 to Network
Caution: Currently,youmustusetheDP600’supperEthernetporttoconnecttoyour
network.ThelowerEthernetportiscurrentlynonfunctional.
!
4
3
2
1
DP600Program Optimizer
DP600Program Optimizer
!
Connect provided USB keyboard here or in rear panel
Dolbyandthe double-D symbol are registered trademarks of Dolby Laboratories.
Dolbyandthe double-D symbol are registered trademarks of Dolby Laboratories.
Riskofelectricshock.
Donotopen.
Thisequipmentmustbe
earthed/grounded.
Nouserserviceableparts
inside.Referallservice
toqualifiedpersonnel.
WARNING
100–240Vac
3.0–1.25A50/60Hz
MAINSINPUT
MAINSINPUT
ModelDP600
ModelDP600
ProgramOptimizer
ProgramOptimizer
PowerSupply
AlarmReset
PowerSupply
AlarmReset
Connect upper Ethernet port to network
Connect power Rear-panel USB ports