Dolby Laboratories DVD Micro Theater System Adjusting the Sound, To select the listening channel

ADJUSTING THE SOUND

Pro Logic Emulation Mode

The Pro Logic emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content is not of optimum quality, or if there is a desire to hear the program more "as it used to be". When this mode is used, it is called Pro Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation mode is optional. Dolby does not require PLII products to use the original Pro Logic decoding algorithm. However, if the DSP contains the original Pro Logic code, and if the product maker would like to use it, this is quite acceptable and even encouraged. A product must not offer both original Pro Logic and the Pro Logic emulation mode.

Matrix Mode

The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger". The Matrix mode may also find use in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono.

DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. This Unit does not decode DTS Digital Surround signal.

To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the DIGITAL AUDIO OUT jack of the Main Unit.

Manufactured under license from Dolby Laboratories.

'Dolby' , 'Pro Logic II' and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digtial Out" are trademarks of Digital Theater Systems, Inc.

To select the listening channel

1.When the disc is stopped, you can press the 5.1/2.1 CH button on the remote control to select different speakers output status shown on below table.

2.At AV IN function mode, you also can press the PRO LOGIC II button repeatedly on the remote control to select

PRO LOGIC II (indicator on the front panel of display will illuminate).

3.You can active or off subwoofer output by setup menu.

Notes:

•The wording "2.1 CH" will be corresponded to the audio/sound output from Front Left and Front Right speakers plus the Subwoofer.

•5.1/2.1 CH button is no response to JPG CD-ROM or JPG/MP3 CD-ROM. Please select 5.1/2.1 CH output before putting such CD-ROM.

•Dolby Digital 5.1 CH will not be activated on Pro Logic II.

The following table show which speakers are working in the various modes.

											L/R				SUB-						Dolby Pro Logic II Selection
					5.1 / 2.1				SPEAKER
FUNCTION		DISCS												WOOFER
					CH Button				(SMALL/
															ON/OFF			EMU		MATRIX			MUSIC		MOVIE	BY PASS
									LARGE)
										SMALL						ON	5.1		5.1			5.1		5.1		5.1 or 2.1
						5.1 CH				LARGE						ON	5.1		5.1			5.1		5.1			5.1 or 2
			DVD /					---							OFF		5		5			5		5				5 or 2
				CD						SMALL						ON	2.1		2.1			2.1		2.1		2.1
						2.1 CH				LARGE						ON	2		2			2		2		2
											---				OFF		2		2			2		2		2
DVD MODE			MP 3			5.1	CH			---	---				5.1		5.1			5.1		5.1		5.1
						2.1 CH		---								ON	2.1		2.1			2.1		2.1		2.1
					---			---							OFF		2		2			2		2		2
						5.1 CH		---								ON	5.1		5.1			5.1		5.1		5.1
			PCM					---							OFF		5		5			5		5		5
										SMALL						ON	2.1		2.1			2.1		2.1		2.1
			DVD			2.1 CH
										LARGE						ON	2		2			2		2		2
								---							OFF		2		2			2		2		2
	TUNER	---			---			---					---				2.1		2.1			2.1		2.1		2.1
										SMALL						ON	5.1		5.1			5.1		5.1		5.1
	AV_IN	---			---					LARGE						ON	5.1		5.1			5.1		5.1		2.1
								---							OFF		5		5			5		5		5

5.1- Represents FRONT LEFT/RIGHT, REAR LEFT/RIGHT, CENTER speakers and SUBWOOFER

2.1- Represents FRONT LEFT/RIGHT speakers and SUBWOOFER

5- Represents FRONT LEFT/RIGHT, REAR LEFT/RIGHT and CENTER speakers

2- Represents FRONT LEFT/RIGHT speakers

Dolby Pro Logic II not applied on Tuner, MP3 and PCM DVD.

E - 17