Page 33 of 46
TUNING TV CHANNELS

SCAN CHANNELS

1. Select the option PVR CONTROL
inside the Menu for Configuration to
carry out the tuning . Remember to
configure the correct input format
before carrying out this operation.
2. Select the option TUNER
CONTROL.
3. The previous option offers two
possibilities. Select AUTOSCAN and
ENTER to confirm. ENTER again and
the TV carries out the Automatic
Tuning. While this is carried out a blue
line that will be shown moving left to
right.
4. VLH, VHF and UHF will be shown.
The number of channels will be shown
on screen after the tuning.
5. If you want to receive TV programs
press W to return to the top menu.
Then select LIVE TV) and press the
VIDEO IN button) to choose RF and to
receive TV
CHOOSE TV CHANNEL

SEARCHING FOR CHANNELs

If the signal or the color is poor, the
user can modify the configuration to
carry out another search or skip a
channel.

Steps:

1. When in TUNER CONTROL, press
CHANNEL SETUP to enter.
2. Use the S T to select the channel
and ENTER to confirm (X will be
shown on the screen).
3. Press the X to exit once it has
finished.

CHANNEL ADJUSTMENT

If the signal is not good or the color is
poor, adjust the tuning using X and W.

NOTE: If signal is weak, the message
“No signal“ it will be shown on screen
or the image disappears. Press the
button SETUP to reach the system
menu. Press SETUP again to leave this
menu. This will make that the unit
retune.