Page 4 of 46
DAMAGE REQUIRING
SERVICE
Immediately unplug the
productfrom thewall outlet or other
power source and refer servicing to
qualified service personnel under
the following conditions: a)When
the power cord or plug isdamaged.
b)If liquid has been spilled, or
objectshave fallen into the product.
c)If the product has been exposed
to rain or water. d)If the product
does not operate normally by
following the operating
instruction; or exhibits a
distinctchange in performance. e)If
the product has been dropped or
damaged in any way.
SAFETY CHECK-Upon
completion of any service or
repairs, ask the service technician
to perform safety checks to
determine that the product is in
proper operating condition.
DISC PRECAUTIONS:
MOISTURE OR DEW-May occur
if the product is suddenly moved
from a cold environment to a
warm one, and prevent it from
readingthe disc. If this happens,
turn the product on for a least one
hour beforeinsertinga disc.
DAMAGED DISCS-Never play
cracked, warped, or otherwise
damaged discs as they may harm
the drive mechanism.
HANDLING DISCS
1 Do not touch the play side of the
disc. Always handle the disc by the
edges. *Do not attach paper, tape
or labels to the disc except for
purpose-designed CD labels
applied with an applicator intended
for the purpose. Out of balance
discs damage the mech anism.
*Keep discs away from direct
sunlight and excessive heat.
DISC CLEANING
*Before playback,wipe the play
surface of the disc outwardsfrom
the center with a clean,soft,
lint-free cloth.
STATEMENT OF
COMPLIANCEThis equipment
has been tested and found to
comply with the limits for A Class
B Digital device pursuant to Part
15 of the FCC Rules, These limits
are designed to provide reasonable
protectionagainst harmful
interferencein a residential
installation, This equipment
generates ,uses,and can radiate
radio frequency energy and, if not
installed andusedinaccordance
with the instructions, may cause
harmfLi interference to radio
communications. However,this is
no guarantee that interference will
not occur in apart icular
installation. If lhis equipment does
cause harmful interference to radio
or television reception,which can
be determined by turning
theequipment off and on,you are
encouraged to tryto correct the
interference by one or more ofthe
following measures: *Reorient or
relocate the receiving antenna and
the power cord. lncrease the
separation between the equipment
and the receiver. *Connect the
equipment to an outlet on a
different circuit than the one to
which the receiver is connected.
*Consult the dealer or an
experienced radio & TV technician
for help.
4
This product is manufactured under
license from Dolby laboratories,
"DOLBY" , "AC-3" , and the double D
symbol are trademarks of Dolby
laboratories. Copyright 1992-1997,Dolby
aboratories.
This Product incorporates copyright
protection technology that is protected by
method claims of certain U.S.patents and
other intellectual property rights owned
by Macrovision Corporation and other
rights owners. Use ofthis
copyrightprotection technology must be
authorized by Macrovision
Corporation,and is intendedfor home and
other limited viewing usesonly unless
otherwise authorized by Macrovision
Corporation Reverse engineering or
disassembly is prohibited.