VigorSwitch P2260 User’s Guide 31
Time Zone, the switch will sync the time in a short after
pressing <Apply> button. Though it synchronizes the time
automatically, NTP does not update the time periodically
without user’s processing.
Time Zone is an offset time off GMT. You have to select the
time zone first and then perform time sync via NTP because
the switch will combine this time zone offset and updated
NTP time to come out the local time, otherwise, you will not
able to get the correct time. The switch supports
configurable time zone from –12 to +13 step 1 hour.
Default Time zone: +8 Hrs.
Daylight Saving: Daylight saving is adopted in some countries. If set, it will
adjust the time lag or in advance in unit of hours, according
to the starting date and the ending date. For example, if you
set the day light saving to be 1 hour. When the time passes
over the starting time, the system time will be increased one
hour after one minute at the time since it passed over. And
when the time passes over the ending time, the system time
will be decreased one hour after one minute at the time since
it passed over.
The switch supports valid configurable day light saving time
is –5 ~ +5 step one hour. The zero for this parameter means
it need not have to adjust current time, equivalent to in-act
daylight saving. You don’t have to set the starting/ending
date as well. If you set daylight saving to be non-zero, you
have to set the starting/ending date as well; otherwise, the
daylight saving function will not be activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function
Daylight Saving and described in detail.
Day Light Saving Start:
This is used to set when to start performing the day light
saving time.
Mth: Range is 1 ~ 12. Default: 1
Day: Range is 1 ~ 31. Default: 1
Hour: Range is 0 ~ 23. Default: 0
Day Light Saving End:
This is used to set when to stop performing the daylight
saving time.
Mth: Range is 1 ~ 12. Default: 1
Day: Range is 1 ~ 31. Default: 1
Hour: Range is 0 ~ 23. Default: 0
2
2.
.1
1.
.5
5
A
Ac
cc
co
ou
un
nt
t
C
Co
on
nf
fi
ig
gu
ur
ra
at
ti
io
on
n
In this function, only administrator can create, modify or delete the username and password.
Administrator can modify other guest identities’ password without confirming the