VigorSwitch P2260 User’s Guide
68
Edit Administrative Control: When you create GVRP group, you can use Administrative
Control function to change Applicant Mode and Registrar
Mode of GVRP group member.
Refresh: Refresh function can help you to see current GVRP group
status.
2
2.
.1
11
1
S
ST
TP
P
C
Co
on
nf
fi
ig
gu
ur
ra
at
ti
io
on
n
The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding
loops in switched networks. When STP is enabled, ensure that only one path is active
between any two nodes on the network at a time. User can enable Spanning Tree Protocol
on switch’s web management and then set up other advanced items. We recommend that
you enable STP on all switches to ensure a single active path on the network.
2
2.
.1
11
1.
.1
1
S
ST
TP
P
S
St
ta
at
tu
us
s
Function name:
STP Status
Function description:
In the Spanning Tree Status, user can read 12 parameters to know STP current status. The
12 parameters’ description is listed in the following table.
Parameter description:
STP State: Show the current STP Enabled / Disabled status. Default is “Disabled”.
Bridge ID: Show switch’s bridge ID which stands for the MAC address
of this switch.
Bridge Priority: Show this switch’s current bridge priority setting. Default is
32768.
Designated Root: Show root bridge ID of this network segment. If this switch
is a root bridge, the “Designated Root” will show this
switch’s bridge ID.