VigorSwitch P2260 User’s Guide 87
reAuthEnabled: Choose whether regular authentication will take place in this
port.
Default: ON
reAuthPeriod (1-65535 s): A non-zero number seconds between the periodic
re-authentication of the supplicant.
Default: 3600
max. Request (1-10): The maximum of number times that the authenticator will
retransmit an EAP Request to the supplicant before it times
out the authentication session. The valid range: 1 – 10.
Default: 2 times
suppTimeout (1-65535 s): A timeout condition in the exchange between the
authenticator and the supplicant. The valid range: 1 –65535.
Default: 30 seconds.
serverTimeout (1-65535 s): A timeout condition in the exchange between the
authenticator and the authentication server. The valid range:
1 –65535.
Default: 30 seconds
2
2.
.1
14
4
A
Al
la
ar
rm
m
C
Co
on
nf
fi
ig
gu
ur
ra
at
ti
io
on
n
2
2.
.1
14
4.
.1
1
E
Ev
ve
en
nt
ts
s
C
Co
on
nf
fi
ig
gu
ur
ra
at
ti
io
on
n
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send out the trap
information while pre-defined trap events occurred. The switch offers 24 different trap
events to users for switch management. The trap information can be sent out in three ways,
including email, mobile phone SMS (short message system) and trap. The message will be
sent while users tick (;) the trap event individually on the web page shown as below.
Parameter description: