VigorSwitch P2260 User’s Guide 57
Parameter description:
Port 1-26: Port number.
PVID: This PVID range will be 1-4094. Before you set a number x
as PVID, you have to create a Tag-based VLAN with VID x.
For example, if port x receives an untagged packet, the
switch will apply the PVID (assume as VID y) of port x to
tag this packet, the packet then will be forwarded as the
tagged packet with VID y.
Default Priority It bases on 802.1p QoS and affects untagged packets. When
the packets enter the switch, it would get the priority
precedence according to your Default Priority setting and
map to 802.1p priority setting in QoS function. For example,
while you set Default Priority of port 2 with 2 and transmit
untagged packets to port 2, these packets will own priority 2
precedence due to your default 802.1p Priority Mapping
setting in QoS function and be put into Queue 1.
Drop Untag: Drop untagged frame. You can configure a given port to
accept all frames (Tagged and Untagged) or just receive
tagged frame. If the former is the case, then the packets with
tagged or untagged will be processed. If the later is the case,
only the packets carrying VLAN tag will be processed, the
rest packets will be discarded.
2
2.
.8
8.
.4
4
P
Po
or
rt
t-
-b
ba
as
se
ed
d
G
Gr
ro
ou
up
p
Function name:
Port-based Group Configuration
Function description:
It shows the information of the existed Port-based VLAN Groups. You can easily create,
edit and delete a Port-based VLAN group by pressing <Add>, <Edit> and <Delete>
function buttons. User can add a new VLAN group by inputting a new VLAN name.