VigorSwitch P2260 User’s Guide 1
1
PPrreeffaaccee
In this user’s manual, it will not only tell you how to install and connect your network
system but configure and monitor the VigorSwitch P2260 through the built-in CLI and web
by RS-232 serial interface and Ethernet ports step-by-step. Many explanations in detail of
hardware and software functions are shown as well as the examples of the operation for
web-based interface and command-line interface (CLI).
1
1.
.1

1

O

Ov

ve

er

rv

vi

ie

ew

w

VigorSwitch P2260, implemented 24 10/100Mbps TP + 2 Gigabit dual media ports with
TP/SFP, is a standard switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet and
Ethernet specifications. The switch can be managed through RS-232 serial port via directly
connection, or through Ethernet port using Telnet or Web-based management unit,
associated with SNMP agent. With the SNMP agent, the network administrator can logon
the switch to monitor, configure and control each port’s activity in a friendly way. The
overall network management is enhanced and the network efficiency is also improved to
accommodate high bandwidth applications. In addition, the switch features comprehensive
and useful function such as QoS (Quality of Service), Spanning Tree, VLAN, Port
Trunking, Bandwidth Control, Port Security, SNMP/RMON and IGMP Snooping
capability via the intelligent software. It is suitable for both metro-LAN and office
application.
M
Mo
od
de
el
l
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
Model Port 25, 26 Configurations
24-Port PoE L2 Managed
Fast Ethernet Switch with
2 SFP Dual Media
Two types of media --- TP and SFP Fiber
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit,
Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver is a Gigabit Ethernet port
that fully complies with all IEEE 802.3z and 1000Base-SX/LX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic Wavelength
Division Multiplexing (WDM) technology that transports bi-directional full duplex signal
over a single fiber simultaneously.
For upgrading firmware, please refer to the Section 2-22 for more details. The switch will
not stop operating while upgrading firmware and after that, the configuration keeps
unchanged.