VigorSwitch P2260 User’s Guide
82
connected to the supplicant and under 802.1X control is in the authorized state. The
supplicant and other devices connected to this port can access the network. If the
authenticator receives a Radius-Access-Reject, it will send an EAP-Failure to the
supplicant. This means the supplicant is failed to authenticate. The port it connected is
in the unauthorized state, the supplicant and the devices connected to this port won’t
be allowed to access the network.
10. When the supplicant issue an EAP-Logoff message to Authentication server, the port
you are using is set to be unauthorized.
Only MultiHost 802.1X is the type of authentication supported in the switch. In this mode,
for the devices connected to this port, once a supplicant is authorized, the devices
connected to this port can access the network resource through this port.
802.1X Port-based Network Access Control function supported by the switch is little bit
complex, for it just support basic Multihost mode, which can distinguish the device’s MAC
address and its VID. The following table is the summary of the combination of the
authentication status and the port status versus the status of port mode, set in 802.1X Port
mode, port control state, set in 802.1X port setting. Here Entry Authorized means MAC
entry is authorized.
Port Mode Port Control Authentication Port Status
Disable Don’t Care Don’t Care Port Uncontrolled
Multihost Auto Successful Port Authorized
Multihost Auto Failure Port Unauthorized
Multihost ForceUnauthorized Don’t Care Port Unauthorized
Multihost ForceAuthorized Don’t Care Port Authorized